Bag Type Filter

A. The characteristics of the product：

I-DEAL Bag Filter, containing 1 φ180mm filter bag.

1, I-DEAL bag filter cylinder body using FRP winding process, corrosion resistance, high pressure resistance, no leakage.

2, I-DEAL bag filter internal structure novel and reasonable, the lower end of the hollow support, and installed filter bag PP mesh cover

   Fixed frame, the upper end has a filter bag positioning lock block, only need to rotate 60 degrees can be fixed filter bag.

3, I-DEAL bag filter parts are FRP molded, resistant to high pressure, corrosion resistance, no leakage.

4, easy to install, I-DEAL Bag Filter using manual Clamp type Open, in the installation of filter bags and the replacement of filter bags

You don't need any tools to operate.

5, I-DEAL bag filter surface using laminating process, elegant appearance, process environmental protection, color adjustable.

B. Product selection

C.Working Theory

Bag Filter is a kind of pressure filter device, mainly has the filter cylinder, the filter tube cover and the fast opening mechanism, the filter bag strengthening network and other main components, the filter fluid from the upper end of the filtration machine into the filter bag, the filter bag itself is the device in the strengthening of the basket, liquid penetration of the required fineness grade filter bag can obtain qualified leachate The impurity particles are intercepted by the filter bag. The filter replacement filter bag is very convenient, filter basic no material consumption.

    Bag Filter has many advantages, such as reasonable construction, good sealing, strong circulation ability and simple operation. In particular, the filter bag side leakage probability is small, can correctly guarantee the filtration accuracy, and can quickly change the filter bag, so that the operating cost is reduced. The internal and external surface of the filter is average and easy to clean.

D. Mounting Dimensions

E.Precautions

1, Filter material installed in place, fixed lock block rotation 60 degrees.

2, Working pressure can not exceed the rated range.

3, Open the exhaust valve before the start, air drain after closing the exhaust valve. 4, when the pressure difference exceeds the rated range, timely replacement of the filter material.