PP FILTER

A. The characteristics of the product:

I-DEAL security filter, containing 5 PP melt spray filter.

1, I-DEAL security filter cylinder using FRP winding process, corrosion resistance, high pressure resistance, no leakage.

2, I-DEAL security filter internal structure novel and reasonable, the lower end for sealing support, and installation guidance, the upper end

There are five hole positioning plus sealing box, and fastening nut can adjust the sealing degree.

3, I-DEAL Security filter components are FRP molded, resistant to high pressure, corrosion resistance, no leakage.

4, easy to install, I-DEAL Security filter using manual Clamp type Open, in the installation of filter cartridges and replacement filter cartridges

You don't need any tools to operate.

5, filter installation with structural guidance, automatic to bit, simple and convenient.

6, I-DEAL Security filter surface using laminating process, elegant appearance, process environmental protection, color adjustable.

B. Product selection

C.Working Theory

PALL Filter is also named precision filter, a pressure filter device, the use of molded filter material, under the action of pressure, so that the original liquid through the filter material, filter slag left on the pipe wall, filter through the filtration material outflow, so as to achieve the purpose of filtration. Filtration aperture is also different due to the difference of filter material. Precision filtration is a kind of filtration between sand filtration (coarse filtration) and ultrafiltration, and the filtration aperture is generally in the 0.5~100μm range. The filter material formed by the melting spray process has a maximum operating temperature of 60 ℃. Precision filtration removes suspended matter, certain colloidal substances and small particulate matter from the water.

D. Mounting Dimensions

E.Precautions

1, Filter installed in place, fixed seal block nut tightening.

2, Working pressure can not exceed the rated range.

3, Open the exhaust valve before the start, air drain after closing the exhaust valve.

4, When the pressure difference exceeds the rated range, timely replacement of the filter material.